Initial Test on the Hard Enduro Yamaha YZ250X

Follow along on the first official test for the YZ250X. Some mistakes were made on my part during the install of the V Force reeds that was affecting the power of the bike because it caused an air leak. (I was an idiot and only had one gasket because I copied stock) I put a band aid on it by richening the pilot jet. Will obviously address this issue before the next outing.
Was really happy with the suspension setup from Applied Technology and Race Tech. I currently have the Rekluse Torq Drive in the clutch, but the clutch springs were too stiff. Causing the cluch pull to be too harsh and the engagement to be a little too aggressive. Easy swap out as well before the next ride out.
The Hitlis performed great I thought and bike still ripped on top. The GYTR flywheel weight really helped the bike lug a lot better as well through the nasty rocks.
I'm excited to give it a solid test effort again soon after fixing some of these issues. So far so good!