The CL-404R controller has a variety of control modes and is a good helper for various performances

CL-404R controller.
The controller has a built-in 1000 watts power supply.
The front has LED display, buttons, DMX signal input and output outlet and ART-NET signal input and output outlet.
On the back there are four output ports with power input and output terminals.
The controller has a variety of control modes.
Lighting can be controlled using SD card mode.
Tap the up and down buttons to switch the built-in effects.
Click MODE/SET to control the light speed.
Press and hold the up and down button to enter the mode switching screen.
In ART-NET mode, it applies to software that uses ART-NET signals on the market.
The built-in effects of the controller can be controlled from the console via DMX signals.
The CL-404R controller can be directly connected to the DMX signal line, without the need to transfer the signal through the conversion board.
The CL-404R controller has a unique ring mode.
The ring's built-in effect can be retrieved from the console in the current mode.

Based on the ART'NE'T protocol Ethernet network driver, the controller can convert thenetwork data packets in the ARTNET protocol into standard DMX512 data or SPI data. The controllerhas two control modes: ARTNE'T and SD card, which can perform efect recording and can be usedofline, and each port support 680 pixels. This product can be widely used in stageperformance lighting control system, stage performance, bar lighting and other occasions, and it is moreconvenient to use with our lamps.

#pixelbarlight
#wirelessbatterytube
#pixelledlight
#LedPixeltube
#pixelcontroller
#artnetdmxcontroller

any question during use please let us know freely +86-18124666876
Website:www.clenled.com
email:[email protected]
Facebook: www.facebook.com/clenledlightingshow