Sightmark Wraith How To Series: Zeroing Your Digital Day / Night Scope

Sighting in your #Wraith digital day/night vision riflescope is simple and intuitive with Sightmark’s integrated digital Reticle #Zero function. With the aid of a red adjustment reticle, it won’t take long to zero your new Wraith.

Ready to Make Your Mark? Shop Now https://bit.ly/2It9baX

Zeroing, or sighting in, your scope is necessary for accuracy. It aligns your riflescope with the point of aim. After mounting and adjusting the diopter and focus of your Wraith digital riflescope, follow these easy #HowTo Steps:

1. Aim at the center of your target by placing the center of your reticle as viewed through the t the center of the target and take 1-3 shots.
2. Push and hold the middle button until the main menu comes up. Using the arrows on top of the unit, chose “Reticle Settings” and press the center button to select.
3. Using the bottom or down button, choose “Reticle Zero.” Press the center button to select.
4. Once in “Reticle Zero” mode, an additional red cross hair will show up on the screen. Keep your reticle’s crosshair pointed to the center of the target. Use the up, down, left and right arrow buttons to move the red adjustment reticle to the shot grouping you shot in step 1.
5. Exit out of “Reticle Zero” mode by pushing the center button. This returns to the main screen.
6. Take another 1 to 3 shots.
7. Repeat steps 1 through 6 until the point of impact is the same as your point of aim.