How to Replace Exhaust Manifold Catalytic Converter Assembly 2007-2012 Nissan Altima

Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/93/aR/direct-fit-cat...

This video shows you how to install a new exhaust manifold catalytic converter assembly from TRQ on your 2007-2012 Nissan Altima. This vehicle uses an integrated exhaust manifold and catalytic converter assembly. That means you can replace the manifold, or the catalyst, without needing any cutting or welding.

This repair was done on a 2008 Nissan Altima S 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2007 Nissan Altima
2008 Nissan Altima
2009 Nissan Altima
2010 Nissan Altima
2011 Nissan Altima
2012 Nissan Altima

Tools you will need:
• 10mm Wrench http://1aau.to/oXg/1AXAA00010
• 12mm Wrench http://1aau.to/oXg/1AXAA00010
• 14mm Wrench http://1aau.to/oXg/1AXAA00010
• 10mm Socket http://1aau.to/obec/1AXAA00017
• 12mm Socket http://1aau.to/obyu/1AXAA00015
• 13mm Socket http://1aau.to/obyu/1AXAA00015
• 14mm Socket http://1aau.to/obyu/1AXAA00015
• 15mm Socket http://1aau.to/obyu/1AXAA00015
• 21mm Socket
• 22mm Socket http://1aau.to/ooS/1AXAA00266
• O2 Sensor Socket
• Trim Tool Set http://1aau.to/oad9/1AXXX00006
• Vacuum
• 1/2 Inch Impact Gun http://1aau.to/otI/1AXAA00252
• 3/8 Inch Impact Gun
• T55 Torx Socket
• Ratchet http://1aau.to/obD2/1AXAA00016
• Torque Wrench http://1aau.to/oaHN/1AXAA00044
• Gloves http://1aau.to/oac2/1AXSS00048
• Safety Glasses
• 5mm Hex Socket
• 5mm Hex Wrench
• Floor Jack http://1aau.to/o7L/1AXAA00068
• Jack Stands http://1aau.to/oVu/1AXAA00065
• Razor Blade / Gasket Scraper
• Sanding Block
• Wheel Chocks
• Wire Brush http://1aau.to/ots/1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Nissan Altima 2007-2012 4th Gen:    • Nissan Altima 2007-2012 4th Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.