How a plumbing pipe wall light is put together correctly

https://edisonlightglobes.com.au/shop... This video is about how our plumbing pipe wall light is built, this one for 120 Volt for installation in the USA via 4 inch J-Box mount components.

Plumbing Pipe 5 Bulb Wall Feature consists of lengths of pipes, elbows, crosses and tees that sit close to a wall. Each segment has lampholders connected that point in various directions. Complete unit is delivered ready to connect to the wall by two cast flange mounts. A wiring point is required at the left hand mounting flange whilst the other flange is a mount point only. This wall feature has a pressure gauge unit that is for decorative purposes. Where possible add an antique finish to match the rustic nature if the pipework. A number of colour options and combinations are available via the drop-down lists. Pictured here is painted brass with antique brass lamp holders, and black with bronze lamp holders.

This light fitting consists of a total of 5 x E27 lamp holders with 2 wall mounting points. It sits 55mm from the center of the lamp holder to the wall so the bulbs should not exceed 60mm in diameter or 25 Watts power rating. This is a unique design made by hand to order in our workshop. Precision components combined with exacting assembly make this a robust light fitting suited to commercial applications.

Where this fitting is required to be 120Volt we supply with the 4″ J-box mount in the same material and color of the pipe hardware. UL listed components are used but the light fitting itself is not UL listed.

Finish

Choose from a variety of finishes for the pipe and lamp holders.

A combination of tube bulbs and regular bulbs seems to work well with this fitting. These can be Edison vintage filament of LED filament with a warm vintage color.