Скачать или смотреть TimeMass Soap Gen 4 3D Filament Review: UNIQUE But BRUTALLY Tricky!

TimeMass Soap Gen 4 3D Filament Review: UNIQUE But BRUTALLY Tricky! 


---


 WARNING: NOT FOR BEGINNERS!  

This filament is *INSANELY cool* but requires MAJOR setup tweaks. I spent 3 DAYS troubleshooting clogs, drying, and mods! If you’re up for a challenge, here’s what you NEED to know:  


 CRITICAL REQUIREMENTS:  

1. Nozzle Size: MUST be 0.8mm**  

   - Won’t work with standard 0.4mm! (My Bambu Lab X1C/P1S couldn’t handle it — used A1 instead).  

2. FILAMENT DRYING ESSENTIAL:**  

   - Dehydrate *24+ HOURS at 60°C* (I used a filament dryer — no shortcuts!).  

3. PRINTER MODS:**  

   - Removed Bowden tube + printed custom parts for the spool for easy roll.


MY TRIAL & ERROR (3 DAYS OF CLAWING MY HAIR OUT!):  

Nozzle Clogged NON-STOP** until I nailed settings.  

Brim REQUIRED for bed adhesion (skirt/raft failed).  

*DISABLE nozzle cleaning* during timelapse (causes failures!).  


 THE GOOD STUFF:  

Wildly Unique Prints: Creates soap-like, bubble-free shapes (though not exactly like their website).    

Worth the Pain?

If you love tinkering, YES. But expect NO hand-holding


#3DPrinting #FilamentReview #TimeMass #SoapFilament #DIY3D #BambuLab #3DPrintingStruggles #MakerCommunity