etrailer | B and B Dual RV Water Inlets Review

Click for more info and reviews of this B and B Molders RV Water Inlets:
https://www.etrailer.com/RV-Water-Inl...
Check out some similar RV Water Inlets options:
https://www.etrailer.com/dept-pg-RV_W...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-B-an...
Hi everybody. Andy here with etrailer.com. Let's take a quick look at these B&B dual RV water inlets. Now this dual fill water inlet panel is going to let you update your RV's worn water inlets for fresh water. And then before we go any further, let me go ahead and give you some measurements just so you can be confident that this is the one that's going to work for you. Looking at the outside width, we're sitting right at about seven and nine 16 inches wide.

The outside height about five and five 16 inches tall. Let's see if I can give you some measurements here on the cutout. So looking at the cutout width, we are pretty close to six inches wide. And then the cutout height, let see if I can line that up there for you. Looks like we're right about three and three quarters inches tall.

And then if you we inchesre wondering about the total depth that's gonna be including the spouts that are coming out here, looks like we're pretty close to two and a half inches on that total depth. So the gravity fill, opening and spout is going to let you fill your fresh water tank. This does use a barbed connection inside for one and three eighths or one and a quarter hose to tank. And the included tethered twist on cap is going to hold fast to keep that fill clean and prevent water loss. So it's gonna be very easy to secure and remove.

And then the city water inlet connects to a drinking water hose for a pressurized connection at home or at the park. And then as you probably saw, the check valve is brass. That's gonna help keep pressurized water from back flowing. And this is a half inch MPT fitting inside here. That's going to connect to the threaded hose.

And then the rubber plug is going to fit tight to seal out dust, dirt and grime. And you probably also notice we do have an air vent here that's going to balance air pressure giving you a smooth water flow. All you'll need to do is attach three eighths of an inch tubing and that tubing is sold separately. This is NSF, IAPMO, CSA and TEI certified. It includes the mounting hardware as you can see. And I think that's gonna wrap up our real quick look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.