How to use Loading Ramps: Common Mistakes and Correct Use

Aluminium ramps are widely used for loading and unloading earth moving machines. But what procedures should you follow for safe, correct use?
1. Before positioning the ramp, check that the means of transport is securely parked on a solid level surface. If the vehicle has a rear dumper, check that this is locked in a horizontal position (down).
2. Position and secure one ramp at a time using the relevant fixing method for the ramp model.
3. The fixture of the ramp to the vehicle must comply with the model type. If a fixing pin is used this must have a diameter of 13 mm, a length of at least 60 mm, and be made from C40 carbon steel or superior.
4. After positioning, check that the maximum angle of slope of the ramp is within 30% or that the angle formed between the ramp and the ground is not greater than 16°. This precaution ensures that the foot of the ramp remains perfectly flat on the ground.
Read the Article "Loading ramps: positioning, use, and maintenance" here: https://www.usco.it/en/itr-magazine/
#loadingramps #howtouse #howto #aluminiumramps #earthmovingmachines