Скачать или смотреть TBC Utility Module - Prepare Waterline Data

The process begins by preparing data for a water line project, where data imported from a PDF document results in lines on specific layers with gaps. The first step involves standardizing the water line by selecting the appropriate layer and moving objects to a designated water layer, which is then simplified to avoid confusion. After turning off unnecessary layers, the focus shifts to joining line segments using a project cleanup command with a specified gap spacing, resulting in a continuous line. The next task is to elevate the line using an elevation command to ensure the pipe's top is at least four feet below the finished design surface. This involves calculating the necessary cover by adding 5.5 inches, derived from the pipe's outer diameter, to the four feet requirement. The line is then adjusted by applying a negative offset to achieve the desired elevation. With the line now elevated, the final step is to create the utility line, which will be addressed next.