AW55-50SN valve body re-assembly

Описание к видео AW55-50SN valve body re-assembly

Using a Transgo kit I replaced a couple of pistons that were included in the kit and freed up the SLT, SLS and SLU solenoids. One of the plates at the bottom of the assembly had the gasket fused. Gasket remover was not effective. I ended up placing the plate in a pot of boiling water for 20 minutes, then went to work on any bonded gasket pieces with a very sharp blade to avoid scratches.

Комментарии

Информация по комментариям в разработке

Похожие видео