Upgrade Alert: Yamaha Blaster Gets Boosted With XFR Nerf Bars around CTI Brakes and a Wiseco Clutch!

  / wrekkedoffroad      / @vermontlife   Buy Jimmy a Beer! https://www.buyjimmyabeer.com/

This is part 15 in the series.

Big thanks to all the new subscribers! We have jumped by almost 1000 subscribers in two weeks. For a channel that had 2,700 subscribers in March that's saying something.

Did you know... 83% of the channel viewers aren't subscribed. If the content helps you save on repair shop costs, and you think the quality is good, help me build the channel by liking, subscribing and/or buying me a beer, or 2 or 3... I appreciate it.

Support the fun by liking and subscribing: https://bit.ly/2kPku2P
   / @vermontlife  

In this video:
- I work through installing the XFR Pro Peg nerf bars with the full CTI rear brake kit and do some custom work to install around the HPM frame gusset kit.
- I build the clutch pack and hit a snag.
- Get buried by not one, but two, 18" snow storms within two weeks!

👉What's going in this Blaster 200cc Motor:
👉+3mm Vitos Stroker Crank
👉Wossner piston
👉Ported OEM cylinder on second bore. Ported for Trail Riding by Swope Racing
👉Rechambered head to match the port and polish also by Swope Racing
👉Vapor Blasting by Nick's Vapor Blasting
👉Lightened Counter Balancer (2oz lighter)
👉Lightened Flywheel (8oz lighter. Most I've found are 6oz. I'm pushing it a bit with this one.)
👉Keihin PWK Air Stryker 35mm Carb (Not a knock off)
👉Custom Air Intake from HPM PowerSports
👉ProDesign Carb Intake Manifold 34-35mm
👉Stainless bolt kit from HPM PowerSports
👉Advanceable Stator Plate from Ricky Stator
👉Stator has been floated to create a DC electrical system for future lighting.
👉High output lighting coil from Ricky Stator (OEM is 55watt. This is 75Watt)
👉Cases repaired and welded
👉Koyo Bearings
👉Tusk Seals
👉Shift Star Mod done by me
👉Wiseco Clutch Basket
👉Cleaned up and rewrapped harness with Tors, oil injection, key wiring removed

My thanks again to the below companies. This project would not be moving forward without their innovation and support of the Yamaha Blaster platform and #savesportsquads

⬇️TOOLS USED IN THIS VIDEO⬇️
Air Die Grinder: https://amzn.to/3xCvupg
Rotary Burr set: https://amzn.to/3UcHKGa
Caswell Penetrating Sealer: https://amzn.to/4aFu100

SMALL COMPANIES I USE & TRUST

⬇️ SMALL BUSINESSES FOR NEW & USED PARTS ⬇️
https://HPMPowerSports.com/
https://Cronetec.com/
https://Dirtfanatics.com/
⬇️ PORTING / POLISHING ⬇️
https://Swoperacing.com/
⬇️ CASE REPAIR ⬇️
https://www.ebay.com/str/tksparts
⬇️ POWDER COATING ⬇️
https://racemetalsmiths.com/
⬇️ VAPOR BLASTING & ZINC COATING ⬇️
  / nicksvaporhoning  

🎯Check out my Other Videos:
--------------------------------------
👉    • How To Transform A Yamaha Blaster Wit...  

🎯 Your Queries
How to build a built Blaster
How to Repair Two Stroke
How to build an ATV Trail Beast

🎯Hashtags
#atvrepair
#yamahablasterbuild
#twostroke

🎯Chapters
00:00 Introduction
01:09 Nerf Install
16:43 Clutch Build
33:04 Snow Storms!
34:15 Clutch Bolt Repair
38:19 Outro