ASSEMBLY + RADIO SETTINGS • E-flite Carbon-Z T-28 Trojan 2.0mm PNP • (English/Français 4K 60fps)

🇺🇸 Hi folks 👋🏻🤠

Thank you for watching this video and don't forget to subscribe so you don't miss anything (it's free but it helps content creators a lot) 🙏🏻🥰

If you want to help me to expand my squadron 😜 or buy a specific plane to review, you can help me by making a small donation via my PayPal link https://www.paypal.me/arthurjanin?loc...

Thank you very much in advance my friends 🤩🙏🏻





🇫🇷 Salut les copains 👋🏻🤠

Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour ne rien manquer (c’est gratuit et pourtant ça aide énormément les créateurs de contenus) 🙏🏻🥰

Si vous voulez m’aider à agrandir mon escadron 😜 ou que j’achète un avion en particulier, vous pouvez m’aider en faisant un petit don via mon lien PayPal https://www.paypal.me/arthurjanin?loc...

Merci beaucoup beaucoup d’avance les amis 🤩🙏🏻




📸 Follow me on Instagram :   / arthuraerorc  
⏰ TikTok : https://vm.tiktok.com/ZMNYCqUhC/


You can buy my things here ⬇️
✈️ FMS planes ➡️ https://www.fmshobby.com/FeYKZYrJINBwLe
🎮 Jeti Rx and DS16 ➡️ https://www.opale-paramodels.com/fr/ ‪@OpaleParamodels‬
🔋CNHL LiPo ➡️ https://chinahobbyline.com/?ref=I5Ew9...
✈️ Jets and more ➡️ https://www.turbines-rc.com/fr/?aff=4





⚓️🇺🇸 E-flite Carbon-Z T-28 Trojan 2.0m PNP


Wingspan: 1980mm (77.95”)
Length: 1620mm (63.78”)
Empty weight with Rx, without LiPo : 4660gr
Flying Weight CNHL 6S 5000 70C (830g) : 5490g
Motor : 5040 - 500KV outrunner 14 pole
ESC : Avian 70A Smart 6S LiPo IC5 or EC5
Prop : 14.75 x 10
Servos Metal gear : 25g x 6pcs + one 16g for nose steering
Recommended Battery: 6S 3200-7000mAh
Radio : 6ch mini

❌ Book CG : 175-185mm from wing Leading edge where fuselage meets.
MAIDEN at 190mm With CNHL 6S 5000 70C (830gr) placed at the rear edge of plywood


📏 Rates (my low / book’s low / 100%) :
Ailerons : 50% (23mm) / 70% (32mm) / 100%
Elevator : 50% (15mm) / 70% (19mm) / 100%
Rudder : 40% (20mm) / 100% (40mm) / 100%
Flaps : First notch 40mm with 2mm down elevator / second notch 80mm with 3mm down elevator


⏰ Flights with timers and voltage (checked few minutes after landing):




0:00 Intro
0:20 Balance prop
0:50 Decals…🤪
5:15 Engine
6:44 Cowl
7:22 Prop mounting
8:13 Rudder
11:00 Elevator
13:51 Wing
16:15 Plug Servos in JETI Rx
19:10 Start up JETI DS16
20:00 Flaps settings
23:31 Center elevator linkage
24:13 Gyro settings
26:15 Rates settings
31:47 Rx velcro
32:06 CG setting
33:30 Landing Gear sequence
34:00 Tail sit method 😇
34:42 Placement CNHL 6S 5000 70C 830g
35:12 Please Subscribe 🙏🏻😍
36:15 Details photos






#eflite #t28 #rcplane #trojan #warbird #jeti #opale #radiocontrol #giant #modellbau #new #foam #rc #aviation #release #assembly #build