baby parka car seat cover

This video shows you how to install the baby parka car seat cover on your infant car seat.To get started lay the cover on teh seat, scoop the bottom of the cove over the bottom edge of the car seat, pull under the canoy and over the top edge. Return the canopy to the original position, unzip and the seat is ready for your baby. Gently place your baby in the seat, putting one strap over one shoulder and then over the other - making sure that the harness system is snug, put a hat on your baby if you like, use the car seat cover to snuggle your baby and rezip. Now your baby is nice and snug. Our car seat cover does not interfer with the functionality of the car seat at all, it simple goes over the top like a shower cap. You an still use th canopy, handle and even with the cover on the seat will still work with the base. We have added extra to the sides and top and bottom. This is to accommodate your growing baby. When your baby starts off in the set they are in a lower position, by the time they are out of this seat, their heads are at the top. One zipper zips all the way up while the other stops short. We have done this so that when you are going from house to car your baby is protected from the snow or rain without being sealed in. You can use this in the half position by unzipping and tucking in the flap or if you want to get the flap out of the way completely, unzip to the end and tuck in. Visit us www.babyparka.ca