Wire wrap pendant tutorial.

Hello and welcome to my latest tutorial.

To make this pendant you will need -
• 0.8mm wire (20g), 2 x 12" (31cm) 1 x 6" (15cm)
• 0.3mm weaving wire (28g) 200cm (I wind mine onto a bobbin, but you can cut lengths as you go if you prefer)
• drilled cabochon or large bead, mine is 20mm by 20mm (you can use a different size and shape, just remember to adjust wire lengths and weave repeats accordingly)
• bead, mine is 10mm, again you can use any size you like
• small cabochon or cubic zirconia, 5mm
• 2 x 3mm beads
• 2 jump rings, whatever size you have handy. Mine are 10mm and 8mm outside measurement

I no longer put links to tools on here.
The tools I use are:
• Tronex needle nose pliers
• Tronex short round nose pliers
• Tronex razor flush cutters
• Beadsmith flat nose nylon jaw pliers
• Occasionally I use tronex bent nose pliers
• Occasionally I use heavy-duty wire cutters
• Occasionally I use xuron needle nose pliers
• Bobeeze bobbins (medium size with no extra weights)

Tutorial advertised in this video - weaving and more for beginners:
https://www.etsy.com/uk/listing/10278...

Gail Chambers facebook group for cabochons (and drilled hearts):
  / cabochoncafe  

Facebook -   / kellyjjewellery  
IG - kellyjjewellery
Twitter - KellyJJewellery
My Etsy store - (where you can see my tutorials and jewellery for sale):
https://www.kellyjonesjewellery.etsy.com

Thanks for watching x



Music credits:
Music: Feel
Musician: LiQWYD