Header Install 2014 Chevy SS (JBA Headers & Midpipes)

Saw an article on the JBA exhaust system for the Chevy SS on superchevy.com and decided to try out the headers and midpipes. Headers were awesome in my opinion and the midpipes were also awesome although they didn't fit right up like they did in the article. For some reason my stock exhaust is only 2 1/4 diameter and welded between the second set of cats and the H-Pipe. The 2014 SS they used in the article wasn't like this as it just had a slip joint held with a band at this spot and the article says this was stock and that that stock system is also 2 1/2 apparently since it slipped on just fine. Anyway here's is a vid of my install it's not my best vid so I apologize. Better ones are coming. The super Chevy article is linked below. I sped up the first part to try and make the vid a little shorter. Headers where purchased from JBA's website for around $650, catted midpipes were $416 from their website. If you feel the need to leave a thumbs down. Let me know why so I can improve. Respectfully please. YOU KNOW THE VIBE, HIT THAT SUBSCRIBE.

http://jbaspeedshop.com/i-22725972-20...


http://www.superchevy.com/how-to/exha...


The torque specs site I used is also listed below

http://paceperformance.com/files/pdf/...