Cylinder head removal and rebuild 2013 Audi A4 2.0 TFSI

How to remove the cylinder head and rebuild it on a 2013 Audi A4 Quattro 2.0TFSI with Torque specs and sequences.

Vw/ Audi Sealant is Loctite brand 5970



Cylinder Head, Valvetrain – 2.0L CAEB,
CPMA
Fastener Tightening Specifications
Component Nm
Balance shaft timing chain guide rail 20
Bearing bracket 1) 3) 9
20 plus an
additional 90°
(¼ turn)
Camshaft adjuster actuator 5
Camshaft Position (CMP) sensor 9
Camshaft timing chain guide rail guide pins 20
Chain tensioner 4) 9
Chain tensioner 2) 85
Control valve-to-camshaft housing 35
Cylinder head with wrench clearance 1) 5)
Tighten in 3 stages:
• Tighten to 40 Nm
• Tighten 90° further using a rigid wrench.
• Tighten 90° further using a rigid wrench.
Tighten in 2 stages:
• Tighten to 8 Nm
• Tighten 90° further using a rigid wrench.
Exhaust side balance shaft 1) 9
Heat shield 20
Intake side balance shaft 1) 9
Mounting plate 9
Oil dipstick guide tube-to-timing chain cover 9
Plug with ball head for the engine cover 5
Sealing plugs with ball head for the engine cover 9
Sealing plugs with ball head for the engine cover 5
Timing chain tensioning rail 20
Timing chain tensioning rail guide pins 20
Transport bracket 25
1) Replace fastener(s). 2) For bolt tightening clarification, refer to ElsaWeb, Balance Shaft Timing Chain
Overview, item 4. 3) For bolt tightening clarification, refer to ElsaWeb, Camshaft Timing Chain Overview,
items 5 and 7. 4) For bolt tightening clarification, refer to ElsaWeb, Camshaft Timing Chain Overview,
and item 2. 5) For bolt tightening clarification, refer to ElsaWeb, Cylinder Head Overview, with
Wrench Clearance“ items 4 and 6.

Component Nm
Adapter between connecting piece and high pressure
fuel line
40
Air duct-to-lock carrier 2
Cold start injector 10
E-Box cover 3.5
Engine Speed (RPM) sensor 4.5
Fuel pressure sensor 27
Fuel rail to intake manifold 10
Fuel supply line connectors 1) 40
Fuel supply line connection on the fuel rail 1) 40
Fuel supply line union nut 20
High pressure fuel line 27
High pressure fuel line to adapter 20
High pressure pump
First tighten the bolts diagonally hand-tight, then to 5 Nm
and then to 20 Nm.
20
Intake air temperature sensor 9
Intake manifold 9
Intake manifold support nut 10
Intake manifold support bolt 23
Knock Sensor (KS) 20
Oxygen Sensors (O2S) 55
Throttle valve control module 10
1) Replace fastener(s).