Installation of the John Cooper Works JCW Pro Exhaust on a 2021 GP3 MINI Cooper

I created this short video to show that the JCW Pro Exhaust kit will fit and work on the 2021 GP3 MINI.

I used kit: 18302407323 Exhaust Flap System

I got the kit from MINI of Kennesaw: https://parts.miniofkennesaw.com/oem-...

You will need to choose exhaust tips since they are NOT included in the kit. Your options are Stainless or Carbon Fiber. I went with the Carbon Fiber tips but here is a link for each. It's important to note that they are sold as single units so you will need two .

Stainless: https://parts.miniofkennesaw.com/oem-...

Carbon Fiber: https://parts.miniofkennesaw.com/oem-...

This is not the tuning kit. This is only the exhaust kit, and it is all you need for the GP3.

The 3D printed remote control holder I used was created by Christos Goulas. He is in Greece but shipping from him is very fast. I received mine in 4 days (Florida, USA). However, shipping will depend on your location. The link below is where you can purchase:

https://www.etsy.com/listing/70775451...

Tools needed:

3/8” Ratcheting Wrench
1/4” Ratcheting Wrench
T45 Torq
Long 3/8 extension
Medium 3/8 extension
Long 1/4 extension
Medium 1/4 extension
Flash Light
¼” Ratcheting Wrench
Diagonal cutters
16mm Deep Well Socket
18mm Socket
10mm Socket
11/16” socket (might be a metric equal but it worked)
Soft face Mallet
Breaker Bar
T25 torq in ratchet and or screw driver (I ended up using both in tighter spaces)
Standard Screw driver

Plastic pop panel button remover would be a good idea. I did not have one so I just used a standard screw driver

I also used a Milwaukee battery powered fan as It was hot as hell.

Please feel free to ask questions in the comments.