How to Replace Outer Tie Rod 2007-2012 Nissan Versa

Buy Now!
New Tie Rod from 1AAuto.com https://trq.video/ia-1ASTE00661

This video shows you how to install new TRQ outer tie rods on your 2007-2012 Nissan Versa. Outer tie rods, sometimes referred to as “tie rod ends,” connect the steering rack to the steering knuckle. Their joints can wear out over time, causing loose steering, vibrations, and uneven tire wear. They are also a common failure point in localities with safety inspections.

This repair was done on a 2011 Nissan Versa S 1.8L Hatchback 4-Door FWD Automatic and the process should be similar on the following vehicles:
2007 Nissan Versa
2008 Nissan Versa
2009 Nissan Versa
2010 Nissan Versa
2011 Nissan Versa
2012 Nissan Versa

Tools you will need:
• Pry Bar https://trq.video/oVy-1AXAA00020
• 18mm Wrench
• 14mm Socket https://trq.video/obzL-1AXAA00015
• 16mm Socket https://trq.video/obzL-1AXAA00015
• 21mm Socket
• Pliers
• Socket Extensions https://trq.video/obzL-1AXAA00015
• Torque Wrench https://trq.video/oaIW-1AXAA00044
• Gloves https://trq.video/oae4-1AXSS00048
• Marker / Writing Utensil
• Safety Glasses
• Floor Jack https://trq.video/o8z-1AXAA00068
• Hammer
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
2007-2012 Nissan Versa 1st Generation:    • 2007-2012 Nissan Versa 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.