Subwoofer alignment without the distance measurements?

I have a helpful little shortcut for you. In sound systems with a center sub array, you don't need to take distance measurements anymore to complete the relative absolute method. All you need are the pre-alignment delay values. You will need to apply an offset, though, if your sub array is not coplanar with your mains.

I have applied this shortcut to SubAligner. If you choose Center on the Alignment Position page and fill out the sub depth, then the distances for the alignment will be filled out for you.

Links:
https://www.merlijnvanveen.nl/en/stud...
https://www.sounddesignlive.com/sub-a...
https://www.subaligner.com/
___
💙 Start supporting Sound Design Live today for as little as $5/month on Patreon:   / sounddesignlive  
___
📈 Get Started with Sound System Tuning - https://www.sounddesignlive.com/get-s...
___
👨‍🎓 SOUND SYSTEM TUNING ONLINE COURSE - https://www.proaudioworkshopseeingsou...
___
📕 Books on sound system tuning - https://www.sounddesignlive.com/audio...
🎙 Podcast for live sound engineers - https://www.sounddesignlive.com/pro-a...
___
Smaart® and the Smaart logo are registered trademarks of Rational Acoustics LLC and are not affiliated with Nathan Lively or Sound Design Live.
___
Be friendly
Facebook -   / sounddesignlive  
Twitter -   / nathandofrango  
LinkedIn -   / nathanlively  
___
I love to geek out about the physics of sound. This channel focuses on the growing opportunity for live sound engineers to improve their confidence and consistency through the understanding of the principles of sound system design and optimization. My goal is to make this channel upfront and honest about my success and failure, so you can learn from both.

I am always open to suggestions and feedback so please comment on this video or contact me through my site.