Скачать или смотреть How to fix a CCTV camera showing grainy, blurry, or fuzzy video

Here's a step-by-step tutorial on how to fix a CCTV camera showing grainy, blurry, or fuzzy video, caused by issues like a dirty lens, poor lighting, or low-resolution settings:

Problem: Grainy, Blurry, or Fuzzy CCTV Video Common Causes: Dirty camera lens, Poor lighting conditions, Low-resolution settings, Damaged lens or sensor, Improper focus or incorrect lens type: Step-by-Step Fix

Step 1: Clean the Camera Lens

Turn off the camera to avoid any damage. Use a microfiber cloth (the type used for glasses) to gently wipe the lens. If dirt is hard to remove, use lens cleaning solution or isopropyl alcohol with a soft cloth. Avoid scratching the lens — never use tissue, paper towels, or rough cloths.

Step 2: Check and Adjust the Focus.

If your camera has a manual focus ring (especially on analog or older IP cameras), adjust it slowly. Have someone monitor the video feed while you fine-tune the focus for clarity. If the camera is out of reach (e.g., mounted high), use a mobile app or client software that supports live focus adjustments (for IP cameras).

Step 3: Improve Lighting Conditions

Make sure the camera's field of view is well-lit, especially at night. Add outdoor floodlights or infrared (IR) illuminators. If indoors, adjust ambient lighting or add supplemental lighting. Ensure IR night vision is working: At night, check if the IR LEDs glow red (if applicable). Clean the IR sensor area too.

Step 4: Check the Resolution Settings

Log in to your DVR/NVR or camera web interface. Go to Camera Settings → Resolution or Video Quality. Set it to the highest supported resolution (e.g., 1080p or 4MP). Also, verify that the bitrate is not too low (which causes video compression artifacts). The frame rate is suitable (15–30 FPS is typical).

Step 5: Inspect for Damage or Obstructions

Make sure there’s no plastic film still on the lens (common with new cameras). Check for spider webs, raindrops, or condensation on the lens housing. If condensation is present, wipe the dome/dome cover inside and out. Reseal the housing or add silica gel packets inside weatherproof housings.

Step 6: Replace or Upgrade the Camera (if needed)

If video remains poor even after all adjustments: Consider replacing the camera with one that has: Higher resolution (e.g., from 720p to 4MP or 4K), Better low-light performance, Wider dynamic range (WDR).

Summary Checklist:

Task Status Lens cleaned ☐
Focus adjusted ☐
Lighting improved ☐
Resolution settings checked ☐
Obstructions/film removed ☐
Camera upgraded (if needed) ☐

Let me know if you want a printable checklist, or if the camera model is known, I can give camera-specific instructions.