Learn an alternate method in creating ribs between rounded edges in Fusion 360 | Rep no. 10

In this exercise we use an alternate method to add a dynamic rib between two rounded edges in Autodesk Fusion 360. While this approach may not always be practical, it can prove useful in special use cases where you may want the rib to conform to the shape of the edges.

🔥🔥If you have found this video useful and would like to support me, you can buy me a coffee at
https://www.buymeacoffee.com/CADjungle

These exercises are intended to help you become familiar with Autodesk Fusion 360 through repetition. These models are not always exact but, are measured for approximation. When attempting to reproduce models for 3D printing, be sure to verify your own real world measurements for authenticity.

If you enjoy this content, please like and subscribe for more upcoming and progressive videos.

I do not work for Autodesk and currently do not get paid to promote their software.

This channel is independent of Autodesk, Inc., and is not authorized by, endorsed by, sponsored by, affiliated with, or otherwise approved by Autodesk, Inc