Скачать или смотреть Raspberry PI - Morse Code Audio Over IP server - experimental setup for an online CW NET

Using Jacktrip in multi client mode ( jacktrip -C ) all connecting morse code CW OPS will automatically be fully connected to all other connecting morse code CW OPS for sending and receiving CW AUDIO tones over IP...

the raspberry pi uses a USB SOUND CARD as its sound card for the jack audio connection kit audio engine system...a ground loop isolator cable is connected from the LINE OUTPUT of the USB SOUND CARD to the LINE INPUT of the same USB SOUND CARD....then all connecting jacktrip clients will automatically be connected to each other for full duplex, full qsk, morse code audio over ip qso'N
https://imgur.com/DJ0OP0G

NOTE: The audio pops heard are audio buffer issues from the recording software taxing the CPU and LAN packet congestion from all 4 connecting computers going full blast on the LAN, taxing the cheap router and cheap network switches used to make this demo...so the quality of the your network and ip provider will effect the performance of this setup...each JackTrip client takes up just under 1 meg of bandwidth...usually you can connect up to 4 people on the JackTrip Rasberry Pi server if you have @ 4-5 megs or more of upload and download speed from your broadband internet provider...

JACKTRIP SERVER COMMAND LINE :
jacktrip -S -n1
JACKTRIP CLIENT COMMAND LINE:
jacktrip -C [ ip address of the jacktrip server ] -n1

you only have to forward the jacktrip port 4464 to the pi's LAN ip address in your router's port forwarding setup page

https://ccrma.stanford.edu/software/j...
https://ccrma.stanford.edu/groups/sou...
http://mdessen.com/wp-content/uploads...
https://sites.google.com/site/jacktri...
https://www.cs.cmu.edu/~music/files/1...
   • JackTrip MULTI-THREADED SERVER for setting...  
https://www.kadenze.com/courses/onlin...
https://sites.google.com/site/jacktri...