Скачать или смотреть Luthier Tips #3: Marking and Drilling Holes for Neck Screws + Ferrules

Here we will look at how to mark and drill the thru-holes and countersunk holes that I use in my guitar builds, all while maintaining an accurate centerline. Next, we will look at how to use a hardtail bridge as a template for thru-drilling two holes: one from the top to allow the strings to be loaded from the back of the body, and one from the bottom to accept the ferrules.

Tools and materials that I use in this video:

4-string Bridge: https://www.cbgitty.com/guitar-instru...
Ferrules: https://www.cbgitty.com/instrument-ha...
3mm Lipped Brad-Point Drill Bit: https://www.leevalley.com/en-ca/shop/...
8mm Lipped Brad-Point Drill Bit: https://www.leevalley.com/en-ca/shop/...
Hammer: https://www.leevalley.com/en-ca/shop/...
Awl: https://www.leevalley.com/en-ca/shop/...
7/16" Forstner Bit: https://www.leevalley.com/en-ca/shop/...
Countersunk Washers: https://www.leevalley.com/en-ca/shop/...
Plastic Calipers: https://www.leevalley.com/en-ca/shop/...
Long-Reach Clamp: https://www.leevalley.com/en-ca/shop/...
Screws: https://www.amazon.ca/100PCS-Screws-P...