1980 Toyota FJ40 Land Cruiser How to Replace Clutch Master & Slave Cylinders - Easy DIY!

Sorry my audio was recording through one channel only on this and a few of my other recent videos. I just fixed the problem for all my future videos, but I can't change the audio on this upload.

https://amzn.to/3JR8Ei0 - Aisin CMT-014 Clutch Master Cylinder
https://amzn.to/3DU8pyL - AISIN CRT-012 Clutch Slave Cylinder
https://amzn.to/3HHixMA - 3 Piece 3/8" Dr. Wobble Extension Set
https://amzn.to/3YvzNLm - Craftsman 5PC FLARE NUT WRENCH SET MM
https://amzn.to/3jDwaEk -Steel Cotter & Hitch Pin Assortment Kit

Just a quick video showing how I replaced both the Clutch Master Cylinder and Clutch Slave Cylinder on a 1980 Toyota Land Cruiser FJ40. Pretty easy job with a few simple tools. We were able to match the pushrod length from the old parts to the new parts and the pedal free play felt perfect. There's a diagram in the video that shows what the spec should be for the pedal 'play' adjustment.
Tools needed
10mm flare nut wrench or line wrench
12mm sockets (standard and deep)
14mm socket
Ratchet or breaker bar and a wobble extension is helpful.
Small Pliers
If you have trouble with getting the bolt nearest the brake booster out, I would suggest trying a 12mm flex head ratcheting wrench.
Thanks for watching!
Please Subscribe!
-Dan the Fix it Man
www.danthefixitman.org
www.amazon.com/shop/danthefixitman

Music used in the video:
'That Slapper' by Otis McDonald

As an Amazon Associate I earn from qualifying purchases.