Troy Bilt Super Bronco Upper and Lower Drive Belt Replacement

Troy Bilt Super Bronco Upper and Lower Drive Belt Replacement

Troy Bilt Super Bronco replacing upper drive belt 954-0468, and lower drive belt 954-0467.

954-0468: https://amzn.to/2E3TtCC
954-0467: https://amzn.to/3iucPQ8

video summary:
To replace the lower drive belt on a Troy-Bilt Super Bronco, start by tipping the mower over securely, ensuring the steering wheel rests on something stable. Remove the mower deck for access, then take out a small bolt and loosen another to slide out the component securing the belt. Use pliers or channel locks along with a socket to remove these bolts, and take off the belt guard by unscrewing its single bolt. Once the pulley is removed, slide the new belt through the available space, using a zip tie to keep the belt loop tight for easier feeding. Reattach the pulley, ensuring the belt sits correctly on top. For the rear pulley, release the tension on the upper drive belt by popping off the spring and temporarily removing the upper belt to slide the lower belt onto the rear pulley. Loosen three bolts to create enough clearance for the belt to fit into the tight space, then tighten them back once the belt is in place. Reinstall the upper drive belt and reconnect the spring to restore tension. Finally, ensure the belt is routed correctly, replace the pulley guard, and double-check all components before completing the process.

video chapters
00:00 - Tilt Mower
00:16 - Remove Mower Deck
01:05 - Installing Belt
01:38 - Installing Belt on Rear Pulley
03:18 - Tighten Everything up

USEFUL LINKS
—
🛒Dinklife Merchandise: https://www.etsy.com/shop/DinkLifeUSA

🤠Our Suggested Travel Gear: https://dinklifeusa.com/travelgear/
🎥The Camera Gear we use to create DinkLife: https://dinklifeusa.com/cameragear/

💃🕺About Use: https://dinklifeusa.com/about/