Скачать или смотреть How to Replace Inner Tie Rods 2007-2014 Chevrolet Silverado 2500 HD

Buy Now!
New Tie Rod Set from 1AAuto.com https://trq.video/ia-1ASFK06804
New Tie Rod from 1AAuto.com https://trq.video/ia-1ASTE01020

This video shows you how to install new inner tie rods from TRQ on your 2007-2014 Chevrolet Silverado 2500 HD. The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms.

Estimated installation time for a professional technician is approximately: 1 hour 12 minutes

This repair was done on a 2011 Chevrolet Silverado 2500 HD LT 6.0L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2007 Chevrolet Silverado 2500 HD
2008 Chevrolet Silverado 2500 HD
2009 Chevrolet Silverado 2500 HD
2010 Chevrolet Silverado 2500 HD
2011 Chevrolet Silverado 2500 HD
2012 Chevrolet Silverado 2500 HD
2013 Chevrolet Silverado 2500 HD
2014 Chevrolet Silverado 2500 HD

Tools you will need:
• 24mm Wrench
• 22mm Socket https://trq.video/ot5-1AXAA00266
• Inner Tie Rod Removal Tool https://trq.video/oa6-1AXAA00438
• Channel-Lock Pliers https://trq.video/opc-1AXAA00139
• 1/2 Inch Impact Gun https://trq.video/ozb-1AXAA00252
• Torque Wrench https://trq.video/obe4-1AXAA00044
• Anti-Seize Grease
• Gloves https://trq.video/obcn-1AXSS00048
• Liquid Thread Locker
• Safety Glasses
• Floor Jack https://trq.video/oaAd-1AXAA00068
• Jack Stands https://trq.video/oam2-1AXAA00065
• Rubber Mallet

Subscribe:    / @trq  

Check out our playlist:
2007-2014 Chevy Silverado 2500 HD 2nd Gen:    • 2007-2013 Chevy Silverado 2500 HD 2nd Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.