HOW TO: Wire Tuck on a Harley Sportster

HOW TO do a wire tuck on a Harley Sportster!
________
Parts used:

Tank lift - (For 1.5" lift like mine, send seller message asking for 1.5")
► http://amzn.to/2mfdDP7

EZ Fuse Silicone Tape (2 rolls needed!)
► http://amzn.to/2muuQVm

Blue Loctite 243 Threadlocker (removable)
► http://amzn.to/2lXzGag
________

For those of you out there specifically wanting to know how to do a wire tuck, here's a quick walk through.

You'll notice as I progress through this video, I also relocated the Coil + Ignition to the left side. If you are interested in doing that, you can find that "How To" video here:

HOW TO: Coil + Ignition Relocation
►    • HOW TO: Coil & Ignition Relocation + ...  


Wire tucks can be done without doing a Tank Lift, but the wires will usually have run along the right side of the spine. If you do a tank lift, you then have a small channel for the wires to run between the top of the spine and the gas tank. I did a 1.5" tank lift and had enough room. You can find my "How To" here on doing a tank lift:

HOW TO: Install Tank Lift
►    • HOW TO: Install Tank Lift - Harley Sp...  


As always, use caution when doing mods to your bike! If you're not comfortable doing a mod, get some help from a friend who is, or see a mechanic. And if you have any questions, please post up and I'll answer to the best of my knowledge.

Thanks for watching, and I hope it helps some of you out there that are possibly considering doing a wire tuck!

Ride safe out there!

________


► Subscribe! - http://bit.ly/BlokHdYTSub

SOCIAL:
► Instagram - http://bit.ly/BlokHdInstagram
► Facebook - http://bit.ly/BlokHdFacebook
► Twitter - http://bit.ly/BlokHdTwitter






________
*DISCLAIMER:

This is only a guide, and not meant to be taken as the only means of completing this job. I assume no responsibility and am not responsible or liable, directly nor indirectly, for any damage or loss caused or alleged to be caused by or in connection with use of or reliance on any such Content, site or resource.