Скачать или смотреть Foxtech Map-01 Mapping Camera

Where to Buy online: https://www.foxtechfpv.com/foxtech-ma...

Foxtech Map-01 is an interchangeable lens camera with APS-C sensor, which is a good option for higher-quality mapping and survey.

Foxtech Map-01 camera features APS-C Exmor CMOS sensor, and effective number of pixels is 24.3 MP. It also features high ISO range, extended sensitivity lets you shoot natural, nuanced photos in dim light. The 6fps continuous shooting with superior AF tracking---the superb tracking capability, which ensures accurate tracking of your subject.

This Map-01 camera is very light,the body is made of carbon fiber,only 155g(218g with the 16mm F2.8 lens).It is also very small that its body is barely wider than its lens barrel, so this map camera is well suited for users requiring a small, light camera with a wide selection of lenses. You can simply change the camera's lens according to your shooting needs. And the compatible lens are E35mm F1.8, E20mm F2.8, E16mm F2.8 etc. And lens is mechanically locked to the camera body for ultimate stability and focus accuracy.

With the light weight and small size, Foxtech Map-01 camera can be easily integrated into UAVS and small aircrafts. It also could be connected with PPK&RTK system to ensure a centimeter-level accuracy of aerial survey through a trigger switch signal. Also could combine 3 or 5 Foxtech Map-01 cameras with different lens for oblique photography.

Whether for inspection projects such as bridges, roof inspection and agriculture or for photogrammetry, map-making, the combination of Nimbus VTOL and Map-01 camera offers an impressive solution for UAV surveying. The Foxtech Map-01 camera therefore represents a good starting point for companies wishing to offer high-quality surveys to clients.

Note: Please disconnect the wire from camera before welding to avoid the static electricity.

How to operate:
a.Connect according to FC shutter signal type:
Connect PWM signal wire to camera Pin 3 (PWM) and Pin1 (GND-).
Connect Relay switch signal wire to camera Pin 4(K) and Pin1 (GND-).
b. Power Connection:
Connect the 3S-6S (DC11.2V---DC25V) positive wire to camera Pin 2(+), and negative wire to camera Pin 1(GND-).
Use PPK or RTK System:
If use PPK or RTK system, please lead out the camera Pin 5 (NO) and Pin 6 (NO), and connect them to PPK or RTK system.
Don’t operate the camera immediately after power-on. After 15s self-checking, the camera will acquire the usual parameters for mapping, and it can meet the requirements of most missions. You also could set up the parameters by the menu button on the top of the camera.