This DIY Recirculation tool SAVES TIME on Brew Days!

*Hit that SUBSCRIBE button, you know you want to!!*

BUY ME A BEER 🍺 Doing so will help support the channel and allow me bring you even more brewing content! thanks and Cheers! 🍻 https://www.buymeacoffee.com/Cityscape

Are you like me and always looking to save time during your brew days?! In this video I build a custom recirculation tool that you can use during the vorlaufing process to make your brew days go faster!

Below is the complete parts list you will need (Make sure all parts are food grade, stainless steal)
Half gallon Pitcher (Metal or Plastic that can take 180F heat)
1/4" PEX Tubing (need less than 12" total)
Reducing Adapter 3/8" X 1/4 nptf (you will cut off the "nut" portion of this piece)
Male Adapter 3/8" X 1/4 nptf
Rubber Washer
Shut off Valve 3/8" - 3/8" (optional - I ended up taking this off)
Shower Drain Strainer ( I used a 3 3/8" Diameter)
Stainless Steel Metal Hose clamp or other bendable metal bar.
#10-32 x 1/2" Machine Screw (stainless)
#10-32 Nylon Lock Nut (stainless)
Stainless steel fender Washer (optional but helps spread out wort when put under strainer)

Other DIY Videos:
DIY wort immersion chiller:
   • DIY Wort Chiller for HALF the cost!!  
DIY Hop Spider:
   • Make a DIY Hop Spider  
DIY Mash Tun:
   • How to Build a Mash Tun for All Grain...  
DIY Fermentation Chamber:
   • How to Make a Fermentation Chamber - ...  
Turn an Old Fridge into a Kegerator:
   • Turn Your Old Fridge into a Kegerator...  

You can see all the exact equipment I use in my videos at my Amazon page here:
https://www.amazon.com/shop/cityscape...