Скачать или смотреть AutoSlide: How to Setup Your 10-Digit Wireless Keypad

This is an instructional video on pairing your AutoSlide Keypad and changing the passwords.
Please note:

0:00 Pairing your keypad to your unit
1:38 Changing your keypad's passcodes
3:57 Changing your keypad's batteries

The factory default codes (the passwords the keypad is initially set to) are:
--- "11" for Channel 1 (the left arrow key)
--- "22" for Channel 2 (the right arrow key)

1 Short Beep = Keypad Button/Dial Tone
1 Long Beep = Code Accepted
3 Long Beeps = Modification confirmed
5 Short Beeps = Error during code input
10 Rapid Beeps = Battery Low Warning

Each keypad takes two CR2032 batteries. Put the batteries with the grated side facing down and the smooth labeled side facing up.

Channel 2 can be used as a guest entry code - change it to something public and easy to remember, then change channel 2's passcode after your guests leave.