Nissan Micra K11 throttle body resolder (mass air flow error repair)

Flux in the UK: http://amzn.to/2jumL2x
Flux in Germany: http://amzn.to/2jumM6B
If you were successful, make sure you grab yourself a trophy: http://www.redbubble.com/people/lexon...

If you want to do this thoroughly it is better to replace the solder with a desoldering machine instead of reflowing the solder. But if you don't have a desoldering machine this is okay. Just be aware it could come back in a few years. This should fix a sick mass air flow sensor in the throttle body of a (1995) Nissan Micra K11. Symptoms: irregular RPM when idle and engine stops running when idling. Also can give an irregular jerky sensation when driving at a constant speed.

When connected through a Consult-cable/Nissan Datascan will show wrong voltage (something more than 3v) on the Mass Air Flow sensor when RPM is way too low. Make sure to recalibrate the throttle positioning sensor (the black thing I screw off in the beginning of the video; should be 0.45v) if you decide to take it off (you can leave it on), and it is advisable to reset the self learn in the computer using a Nissan Consult cable and Nissan Datascan.