How to Replace Mavic Mini FRONT RIGHT Arm Tutorial - Removal and Install - DJI Repair

👉 Thanks to PCBWay for sponsoring this video. Check out https://www.pcbway.com/ for custom printed circuit boards, electronics, and rapid prototyping services (Use my referral link to get $5 of New User Free Credit https://www.pcbway.com/setinvite.aspx...!

I'll walk you through, step by step, how to replace the front right arm on the DJI Mavic Mini.

I also did this with a Mavic Mini    • 😈 I made a DJI Mavic Mini FPV Drone  

00:00 Introduction and PCBWay ad
1:42 remove covers
4:45 closer look at what we need to do
5:19 remove heat fin plate cover thing
7:38 locate and remove antenna
8:19 unsolder motor wires
9:00 Remove arm
11:23 Reverse the process to install new arm
---------------
🧠 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at http://rcwithadam.com/

Want to support RCwithAdam? ↴
KO-FI: https://ko-fi.com/rcwithadam
OR
PATREON:   / rcwithadam  
Thanks!

-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
*DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!*
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam #DJI