Скачать или смотреть BOYS ANTI TANK: DISASSEMBLY & ASSEMBLY

"Boys Anti-tank Rifle" was a British anti-tank rifle in use during the Second World War. It was often nicknamed the "elephant gun" by its users due to its size and large bore.

There were three main versions of the Boys: an early model (Mark I) which had a circular muzzle brake and T-shaped monopod, built primarily at BSA in England; a later model (Mk I*) built primarily at the John Inglis and Company in Toronto, Ontario, Canada, that had a square muzzle brake and a V shaped bipod; and a third model made for airborne forces with a 0.30-inch (7.62 mm) barrel and no muzzle brake. There were also different cartridges, with a later version offering better penetration.

Although adequate against light tanks and tankettes in the early part of the war, the Boys was ineffective against heavier armour and was phased out in favour of the hollow charge-based PIAT mid-war.

The eponymous creator of this firearm was Captain Henry C. Boys (the Assistant Superintendent of Design) who was a member of the British Small Arms Committee and a designer at the Royal Small Arms Factory, Enfield. It was initially called Stanchion but was renamed after Captain Boys as a mark of respect when he died a few days before the rifle was approved for service in November 1937.

A bolt action rifle fed from a five-shot magazine, the weapon was large and heavy with a bipod at the front and a separate grip below the padded butt. In order to combat the recoil caused by the large 0.55 inch (13.9 mm) round, a muzzle brake was fitted on the barrel while the receiver was allowed to slide along the frame with a shock absorber attached to the rear of the rifle. The Boys had been designed with numerous small narrow-slotted screws of soft steel set very tight into the body of the weapon and its repair and maintenance proved difficult.

The cartridge was an adaptation of the .50 BMG,[citation needed] with a belt added firing a 47.6 gram bullet. At its introduction, the weapon was effective on light armour (23.2 mm thick) at 100 yards (91 m).

There were two main service loads used during the Second World War: The W Mark 1 (60 g AP at 747 m/s) and the W Mark 2 ammunition (47.6 g AP projectile at 884 m/s). The W Mark 1 could penetrate 23.2 mm of armour at 100 yards, about the thickness used on the frontal armour of a half-track or armoured car, or the side or rear armour of a light tank. Later in the conflict, a more effective round was developed, the W Mark 2, which fired a tungsten-cored projectile at 945 m/s. The Boys' effective range against unarmoured targets (for example, infantry), was much greater.

Despite its recoil slide and rubber-cushioned buttpad, the recoil of the weapon (along with noise and muzzle blast) was said to be painful, frequently causing neck strains and bruised shoulders. Consequently, the Boys was almost never fired as a free weapon (that is, not affixed to a support) except in emergencies.

https://en.wikipedia.org/wiki/Boys_an...



This video was made with the help of the game "World of Guns: Gun Disassembly"

https://store.steampowered.com/app/26...