Bendi Forklift Training Flexi Truck Training | How to de-stack at eye level using the Flexi truck

In this online Bendi Forklift Training video, our instructor demonstrates how to de-stack at eye level using a Bendi/ Flexi forklift truck.

Visit https://4ksforklifttrainingltd.co.uk/... for more information on the best Bendi forklift training to book your course today or call 0121 294 9395.

To skip to a particular section of the Bendi forklift training video please see the chapters below.

► Steps for Bendi/ Flexi forklift training:

0:00 Flexi Forklift Training Intro

0:17 First thing, put the Flexi truck into gear.
Have a look around in your all around observation (GOBO Procedure) to make sure nobody's in the vicinity.

0:27 Release the handbrake and slowly move forwards looking in the direction of travel and looking out for your pivot point which is centre of the front wheel.
Align up with the centre block of the pallet.

0:42 Once in position, stop the Flexi truck, put it into neutral, turn the wheel completely to the left.

0:53 Put it back into the gear, looking all around in your all round checks, moving slowly forward aligning the forks stopping six inches away from the racking.

1:07 Apply the handbrake and putting the Bendi truck into neutral and using the hydraulics, take the tilt off.

1:20 Now raise the forks up to eye level.

1:31 Once the forks are in position, move forward again entering the pallet nice and smoothly.

1:41 Turn the steering as you're entering the pallet entering nice and slow, keep on going forwards entering the pallet turning the wheel as you are manoeuvring.

1:53 Kissing just up to the pallet applying the handbrake again and putting it into neutral.

2:00 Raise the forks up lifting the pallet off two inches off the racking

2:08 Next, reverse the Bendi forklift truck. Again into gear having a look around releasing the handbrake looking in the direction of travel but also needing to look at the load that's coming out.

2:37 Handbrake on again into neutral, lower the load down.

2:53 Apply back tilt to secure the load.

2:59 Next, reverse back to your starting position. Into gear again having a look around releasing the handbrake straightening the steering before we manoeuvre so the truck is nice and straight.

3:30 Apply handbrake and into neutral.

And that's how you de-stack at eye level using a Bendi/ Flexi forklift truck.


4KS Forklift Training Ltd provides RTITB accredited forklift truck training at both our fully approved and accredited training centres in Birmingham and Peterborough.

► View all our Forklift Training Courses: https://4ksforklifttrainingltd.co.uk/...

► Forklift Refresher Course: https://4ksforklifttrainingltd.co.uk/...

► Reach Truck Training: https://4ksforklifttrainingltd.co.uk/...

► Bendi Flexi Forklift Training: https://4ksforklifttrainingltd.co.uk/...

► LLOP PPT Training: https://4ksforklifttrainingltd.co.uk/...

► Forklift Instructor Course: https://4ksforklifttrainingltd.co.uk/...


► Follow us on Facebook:   / 4ksforklift  
► Follow us on Instagram:   / 4ksforklifttrainingcentre