Скачать или смотреть Hall Effect Joystick Recentering and Recalibration Guide - AimControllers Custom Controller

Hall Effect Joystick Recentering and Recalibration Guide
Recentering and Recalibration the joysticks ensures accuracy and precision while gaming with AimController Custom Controller.

Perform calibration as needed to maintain optimal performance.

Required Equipment
PC or Laptop with internet access and Microsoft software
USB cable to connect the controller to the computer
Calibration Website:
https://dualshock-tools.github.io/

Step-by-Step Calibration Instructions:

Step 1: Access the Calibration Tool
1. Open your preferred web browser on your PC or Laptop.
2. Navigate to the calibration tool website: https://dualshock-tools.github.io/
3. The tool will guide you through the re-centering process of the analog sticks. It consists of four steps where you will be asked to move both sticks in various directions and release them.

💥💥Important: Once the calibration process starts, it cannot be canceled!

Step 2: Connect and Select Your Controller
1. Plug your controller into your PC/Laptop using the USB cable.
2. On the website, press ‘Start’.
3. Choose your DualShock controller model.
4. Click on ‘Calibrate Stick Center’.

Step 3: Start Calibration
1. Enter the Stick Center Calibration section.
2. Ensure to select ‘Write Changes’.
3. Press ‘Start’ to begin the calibration process.

Step 4: Follow Calibration Instructions
1. Move both sticks to the top-left corner and release them. When the sticks return to the center, press ‘Continue’.
2. Move both sticks to the top-right corner and release them. When the sticks return to the center, press ‘Continue’.
3. Move both sticks to the bottom-left corner and release them. When the sticks return to the center, press ‘Continue’.
4. Move both sticks to the bottom-right corner and release them. When the sticks return to the center, press ‘Continue’.

Step 5: Finalize Calibration
1. Once the calibration is complete, press ‘Done’.
2. Return to the main page and select ‘Calibrate Stick Range (Permanent)’.
3. The controller will now sample data – slowly rotate the sticks to cover the entire range.
4. Press ‘Done’ when the process is finished.

Step 6: Press ‘Save changes permanently’ to complete the recentering and recalibration process.


Your controller is now calibrated and ready to use.
Enjoy enhanced accuracy and precision while gaming!