Detailing 101 Clay Towel, Perforated Synthetic Decontamination Towel

https://diydetail.com/products/fine-g...

Instructions for use

*Use on cool surface and out of direct sunlight. Make sure you are using a clay lubricant on the surface to avoid clay transfer to vehicle*

Wash Process:
After a thorough contact wash.
Spray a clay lubricant on the clay towel & over the entire vehicle, focusing on one panel at a time.
To avoid cross-contamination, start at the top of the area you are working with then move to the bottom. 
Make sure your clay towel stays lubricated as you continue working on the vehicle. Once you have finished every panel, your vehicle is properly decontaminated.
Standard Decontamination Process:
Wash vehicles surface to remove loose dirt and debris.
Perform your decontamination panel by panel with the clay towel.
One spray of DIY Detail Iron Remover on the panel surface , and one on the decontamination towel as a clay lubricant.
With the lubricated clay towel & surface, start rubbing the clay towel over the panel you are treating until it glides smoothly.
Using free flowing water rinse off all remaining DIY Detail Iron Remover from the panel.

Deontamination products: https://diydetail.com/collections/dec...
Web site:https://diydetail.com/
Podcast:   • Costly detailing mistakes to AVOID! (...  
#diydetail #detailing #autodetailing #carwash #rinselesswash #nickMcgurk #yvanlacroix
#claytowel #clay #claybar #decontamination#perforedsyntheticdecontaminationtowel #psdt