How to Replace Rear Wheel Bearing & Hub Assembly 2008-2013 Nissan Rogue

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com http://1aau.to/ia/1ASHR00316

This video shows you how to install a new wheel hub and bearing on your 2008-2013 Nissan Rogue. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.

This process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obgI/1AXAA00013
• 17mm Wrench http://1aau.to/oTV/1AXAA00010
• 18mm Wrench
• 14mm Socket http://1aau.to/obou/1AXAA00015
• 17mm Socket http://1aau.to/obou/1AXAA00015
• 18mm Socket http://1aau.to/oadr/1AXAA00043
• 21mm Socket http://1aau.to/oadr/1AXAA00043
• 30mm Socket
• Brake Caliper Compressor Tool. Single Piston. Lever Style. http://1aau.to/oaU/1AXAA00288
• Brake Caliper Hanger http://1aau.to/oh6/1AXAA00439
• Straight Cutters
• 1/2 Inch Impact Gun http://1aau.to/orQ/1AXAA00252
• Air Chisel http://1aau.to/obw/1AXAA00270
• Ratchet http://1aau.to/obwm/1AXAA00016
• Socket Driver
• Socket Extensions http://1aau.to/obou/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/oazX/1AXAA00044
• Bearing Grease
• Brake Parts Cleaner
• Gloves http://1aau.to/oWX/1AXSS00048
• Paper Towels http://1aau.to/oBi/1AXSS00035
• Safety Glasses http://1aau.to/oP9/1AXAA00343
• Floor Jack http://1aau.to/oZM/1AXAA00068
• Hammer http://1aau.to/oSh/1AXAA00091
• Jack Stands http://1aau.to/oRe/1AXAA00065
• Rubber Mallet http://1aau.to/ogu/1AXAA00413
• Wheel Chocks
• Wire Brush http://1aau.to/osc/1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Nissan Rogue 2008-13 1st Generation:    • Nissan Rogue 2008-13 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.