Скачать или смотреть HARD CUTS - 3 channel cut-up harshnoise mixer/splitter (no-input feedback set-up)

The METSÄÄN - HARD CUTS is a 3 channel cut-up harshnoise mixer, than can also be used as a signal splitter. Each channel has a MODE selecting toggle switch (normal ON/OFF) and a momentary TRIGGER stompswitch. In 'normal ON' mode the signal is routed to the output and pushing the TRIGGER interrupts the signal. In 'normal OFF' mode, the signal is only routed to the output of that channel, when the TRIGGER is depressed. Simple.
The inputs are normalized from left to right, which means when noting is plugged into the input of the channel to the right of an input, the signal of the input will also be present there and can be controlled by the controls of this channel individually. This allows for splitting one signal into 3 (or 2) and send it down 3 (or 2) separate EFX chains, for example.

In the set-up in this video here, a very basic no-input feedback example of the HARD CUTS mixer/splitter is given, behold! - for one short moment, i could not resist and engaged the DRONES of the DIRTY DRONE DISTORTION pedal, spoiling the otherwise technical 'no-input set-up' for the purists out there.

More here:   / metsn  




#metsään #thismachinekillsfascists #harshnoise