After market belt tensioner for the Can Am Spyder F3T installed

Another aftermarket mod done in the street in the late fall. Wasn't difficult at all. You get to see the installation from start to finish. I don't have a lot of tools or a garage so if I can do this in the street you can as well. All you will need is a 11mm and 13 MM socket and extension and a T25 Torx bit or wrench some loctite and something like 30 minutes of time. I'll tell you now that this thing works!!!!! I got mine from SlingMods (paid my own money) now lamonster garage makes one as well. The installation should be almost the same as well as the OEM one. If you are like me and you get a severe vibration when trike is under load or around 60 MPH this might just solve your problem or at least not make things worse. Sorry for the voiceover but the original audio was useless, I did add a little background music as the silence when I'm not talking is kinda unnerving.I honestly don't know what tensioner is the best right now I only know that his one works. Hope you find it helpful.

#canamonroad #canamspyder #canamryker #slingmods #Ryker #Spyder #ridelikenother