Скачать или смотреть ⛩SCAFFOLD SAFETY - CLIMBING A SCAFFOLD - NEVER CLIMB ON CROSS BRACES

⛩SCAFFOLD SAFETY - CLIMBING A SCAFFOLD: WHEN you ARE Climbing a Scaffold, NEVER Climb on Cross Braces, they ARE NOT Designed to handle the weight.
•
3️⃣ALWAYS maintain Three Points of Contact - Two Hands AND One Foot OR Two Feet AND One Hand on the Scaffold Ladder at ALL times.
•
👤KEEP your Body as close to the Frame as possible - Leaning way out COULD cause the a Tip Over (directly on top of you).
•
🧮Scaffolds MUST be Designed, Built, AND Inspected by Competent Person.
•
👨🏻‍🏫Training - Employers MUST Train each Employee who works on a Scaffold on the hazards and the procedures to control the hazards. 1926.454.
•
📋Inspections - Before each work shift and after any occurrence that could affect the structural integrity, a Competent Person MUST Inspect the Scaffold and Scaffold components for visible defects. 1926.451(f)(3).
•
1️⃣0️⃣Fall Protection OR Fall Arrest Systems - Each Worker more than 10 feet above a lower level SHALL be protected from Falls by Guardrails or a Fall Arrest System.
•
✖️Capacity - Scaffolds and Scaffold components MUST support at least 4 times the maximum intended load. Suspension Scaffold rigging must at least 6 times the intended load. 1926.451(a)(1) and (3).
•
🌀OSHA 29 CFR 1926.450(b) defines a Competent Person as: one who is capable of identifying existing and predictable hazards in the surroundings or working conditions which are unsanitary, hazardous, or dangerous to employees, and who has the authorization to take prompt corrective measures to eliminate them.
•
🌀OSHA Creds: Scaffolds CFR 1926.451 - General Requirements