How to update an old interior door

In this video I use inexpensive trim to update an old door in my house. I glued and nailed each length of trim on the door to create a raised-panel appearance. Each piece of trim is mitred at 45 degrees, which can be cut very easily with hand tools if needed. The trim was bought for roughly $26 and was enough to complete one door. The door was then primed and painted before being re-hung.

The paint used was a semi-gloss white. My doors had an old oil-based clearcoat on them so before final painting I had to use an oil-to-latex primer.

I only used a couple tools in this video, which you can find below...

Primer to allow a water-based paint to be applied over an oil-based finish - https://amzn.to/2ObvvKe
Semi-gloss white paint (water-based) - https://amzn.to/3r7NVdk

Tape measure - https://amzn.to/2rumH38
Stanley Square - https://amzn.to/2LGe9zE
Brad Nailer: https://amzn.to/2rD7nBc
Wood Glue: https://amzn.to/2I9k9i5
Palm Sander - https://amzn.to/2EfrLCa
Mitre saw: https://amzn.to/2TSI5fM
Milwaukee drill - https://amzn.to/2IaJzf0
Picquic Screwdriver - https://amzn.to/2UM2fMv
Wood Filler - https://amzn.to/3a7teqQ