How to Replace Passenger Side CV Axle 2008-16 Chrysler Town & Country

Buy Now!
New CV Axle Shaft Set from 1AAuto.com http://1aau.to/ia/1AACS00248

A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications. This video shows you how to install one in your 2008-16 Chrysler Town & Country.

• Check here for more videos on the 2008-16 Chrysler Town & Country    • Chrysler Town & Country 2008-16 5th Gen  

This process should be similar on the following vehicles:
2008 Chrysler Town & Country
2009 Chrysler Town & Country
2010 Chrysler Town & Country
2011 Chrysler Town & Country
2012 Chrysler Town & Country
2013 Chrysler Town & Country
2014 Chrysler Town & Country
2015 Chrysler Town & Country
2016 Chrysler Town & Country

Tools you will need:
• Pry Bar http://1aau.to/oa/1AXAA00020
• 21mm wrench
• 10mm Socket http://1aau.to/oa/1AXAA00017
• 19mm Socket http://1aau.to/oa/1AXAA00043
• 21mm Socket http://1aau.to/oa/1AXAA00043
• 32mm Socket http://1aau.to/oa/1AAST00003
• Trim Tool Set http://1aau.to/oa/1AXXX00006
• Straight Cutters
• 1/2 Inch Air Impact Gun http://1aau.to/oa/1AXAA00252
• Ratchet http://1aau.to/oa/1AXAA00016
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Bungee Cord
• Copper Anti-Seize
• Liquid Thread Locker
• Rust Penetrant
• Center Punch http://1aau.to/oa/1AXAA00055
• Rubber Mallet http://1aau.to/oa/1AXAA00413
• Sledge Hammer http://1aau.to/oa/1AXAA00091

Subscribe:    / @trq  

Check out our playlist:
Chrysler Town & Country 2008-16 5th Gen:    • Chrysler Town & Country 2008-16 5th Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.