‘Silas’ Pendant Tutorial by Kelly Jones.

To make this pendant you will need -
• 0.8mm wire (20g) 3 x 13” (33cm)
• 0.3mm weaving wire (28g) approx 200cm
• Oval cabochon, mine is 25mm by 18mm (you can use any size cabochon just remember to adjust wire lengths and weave repeats, for a thicker stone us more wires)
• Small beads, 2 x 3mm, 2 x 2mm
• Jump ring, mine is 10mm (outside measurement)

I no longer put links to tools on here.
The tools I use are:
• Tronex needle nose pliers
• Tronex short round nose pliers
• Tronex razor flush cutters
• Beadsmith flat nose nylon jaw pliers
• Occasionally I use tronex bent nose pliers
• Occasionally I use heavy duty wire cutters
• Occasionally I use xuron needle nose pliers
• Bobeeze bobbins (medium size with no extra weights)

How I oxidize my bare copper -    • Oxidising copper jewellery and after ...  
Facebook -   / kellyjjewellery  
IG jones_kel
My Etsy store - (where you can see my tutorials and jewellery for sale)
https://www.kellyjonesjewellery.com

Thanks for watching x

Music credits.........
Music: See You
Musician: @iksonmusic