Скачать или смотреть Home made Efoil

Diy Efoil

• Flipsky 65161 120kv with carbon/PLA printed motor mount
• Propeller, Flipsky 7.25 x 5 cut down to 140mm
• ESC, Castle Creations HV160 ice, Passively cooled in aluminium box within the main compartment but the base protrudes to the bottom underside of the board
• Battery, 6x hobbyking zippy 8000mah 6s lipo packs arranged to get 12s 24ah pack
• Hydrafoil, Gong kite foil Allvator Rise ALU (I use this for kite foiling as well)
• Home made board 1500mm x 600mm x 100mm
Polystyrene, plywood stringers wrapped in 2 layers of 200g carbon fibre.
• Remote Control made from 3d printed case, arduino and Orange tx module.
• Fail safe. Reciever has built in failsafe so loss of signal from transmitter sends throttle to zero, also I have a reed switch and magnetic lanyard on the signal wire between the Reciever and ESC which means the ESC detects loss of signal and sends throttle to zero.
• Hatch, the main hatch is fastened down with multiple bolts and an EPDM flat rubber seal used for windows. The round hatch is a standard 200mm boat screw down, used for charging and switching on/off
• Small IP68 clear plastic box for reciever on the nose of the board including LCD battery voltage display and magnetic lanyard.
• Weight including batteries 24kg
• Cruise speed 20kmh @ 30amps and top speed so far 27kmh