Parduc® P40 Profiler: Adjusting the hollow radius angle ENG

Описание к видео Parduc® P40 Profiler: Adjusting the hollow radius angle ENG

@parduc_sharpeners
This skate sharpener and profiler P40 video include:

6.1.0 Parduc P40: Adjusting the hollow radius angle
6.1.1 Diamond dresser pin or spinner angle compared to the grinding wheel can be adjusted
6.1.2 If the adjusting is needed, loosen the swivel bolt using 6mm allen key
6.1.3 Rotate the adjusting bolt using 4mm allen key. Adjust extremely small steps at a time
6.1.4 When tightening the bolt the diamond tilts towards the operator. Loosening the bolt tilts the diamond towards the back of the machine
6.1.5 Tighten the fastening bolt
6.1.6 Profile the grinding wheel and perform test sharpening

www.parduc.com

Комментарии

Информация по комментариям в разработке

Похожие видео