Dozer CAT D9R

ENGINE
Engine Model Cat® 3408C
Flywheel Power 302 kW
Bore 137 mm
Stroke 152 mm
Displacement 18 l
Net Power - SAE J1349/ISO 9249 302 kW
Engine Power - Net Power - SAE J1349/ISO 9249 302 kW
Engine Power - Gross Power - SAE J1995* 330 kW
Note (1) Capable of meeting U.S. EPA Tier 1 Equivalent.
Note (2) Engine ratings apply at 1,900 rpm.
Note (4) No derating required up to 2286 m (7,500 ft) altitude.
Engine Power - EU 80/1269 302 kW
Note (3) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
Note * Excludes all fan losses.
Emissions Optional U.S. EPA Tier 1 Equivalent
WEIGHTS
Operating Weight 48784 kg
Shipping Weight 36154 kg
Note (2) Shipping Weight: Includes clutch/brake arrangement, lubricants, coolant, 20% fuel and ROPS, FOPS cab and 610 mm (24 in) extreme service shoes.
Note (1) Operating Weight: Includes clutch/brake arrangement, lubricant, coolant, 100% fuel, hydraulic controls and fluids, 610 mm (24 in) extreme service shoes, SU-Blade, single-shank ripper, ROPS, FOPS cab and operator.
TRANSMISSION
1 Forward 3.9 km/h
2 Forward 6.8 km/h
3 Forward 11.9 km/h
1 Reverse 4.7 km/h
2 Reverse 8.4 km/h
3 Reverse 14.7 km/h
3 Forward - Drawbar Pull 218000 N
2 Forward - Drawbar Pull 400000 N
1 Forward - Drawbar Pull 725000 N
HYDRAULIC CONTROLS
Pump Type Piston-type geared from flywheel
Pump Output - Implement 239 l/min
Tilt Cylinder Flow - Rod End Flow 137 l/min
Tilt Cylinder Flow - Head End Flow 167 l/min
Bulldozer Relief Valve Setting 26200 kPa
Tilt Cylinder Relief Valve Setting 19300 kPa
Ripper - Lift - Relief Valve Setting 26200 kPa
Ripper - Pitch - Relief Valve Setting 26200 kPa
Note (1) Implement Pump output measured at 1,900 rpm and 6895 kPa (1,000 psi).
Note (2) Complete system consists of pump, tank with filter, valves, lines, linkage and control levers.
UNDERCARRIAGE
Shoe Type Extreme Service
Width - Shoe 610 mm
Shoes/Side 43
Pitch 240 mm
Ground Clearance 596 mm
Track Gauge 2250 mm
Length - Track on Ground 3470 mm
Ground Contact Area 4.24 m²
Track Rollers/Side 8
Total Operating Weight** - With Blade and Single-Shank Ripper 48784 kg
Width - Over End Bits 4310 mm
Digging Depth 606 mm
Maximum Tilt 940 mm
Note (1) * Includes blade tilt cylinder.
RIPPERS - ADJUSTABLE PARALLELOGRAM+MULTI-SHANK
Number of Shank Holes 2
Overall Beam Width 1330 mm
Weight - With One Shank 4153 kg
Maximum Penetration Force - Shank Vertical 154 kN
Pry-Out Force - Multi-Shank Ripper with One Tooth 361 kN
Maximum Penetration - Standard Tip 798 mm
Total Operating Weight* - With SU-Blade and Ripper 48221 kg
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 879 mm
Note (1) * Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator.
Note (2) +Includes (1) shank, add 347 kg for each additional shank.
RIPPERS - ADJUSTABLE PARALLELOGRAM SINGLE-SHANK STANDARD/DEEP
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 882 mm/817 mm (34.7 in/32.2 in)
Total Operating Weight* - With SU-Blade and Ripper 48784 kg
Pry-Out Force 332 kN/331 kN (74,637 lbf/74,412 lbf)
Weight - With One Shank 4293 kg/4420 kg (9,464 lb/9,744 lb)
Number of Shank Holes 3-Mar
Maximum Penetration - Standard Tip 1231 mm/1727 mm (48.5 in/68 in)
Note (1) * Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator.
https://www.cat.com/en_ID/products/ne...
With Mr frans waluyo gepeng
Cat D9R
Cat mining
Mining equipment
Gepeng
Cat equipment