DIY Keg washer for home brewing

Thank you for watching my video. I have seen many videos on how these washers are made but none like the one i made. I think it works great and it is very easy to build. Please see the links to all the parts below.

Parts needed for this build are as follows:

1. 1/4 HP Sump Pump $48.07
https://www.amazon.com/Superior-Pump-...

2. Fixed Clean in place ball 1/2" $13.49
https://www.amazon.com/Stainless-Clea...

3. 3/4 in. MHT x 1/2 in. MIP Brass Adapter Fitting $4.98
https://www.homedepot.com/p/Everbilt-...

4. 1/2 in. Galvanized Malleable Iron FPT Cross $7.33
https://www.homedepot.com/p/1-2-in-Ga...

5. Two - 1/2 in. ID Hose Barb x 3/8 in. MIP $1.73
Home Depot has in their plumbing area.

6. 1/2 in. x 12 in. Galvanized Steel Nipple Pipe $5.25
Home Depot has in their plumbing area.

7. 1/4 in. I.D. x 3/8 in. O.D. x 20 ft. Clear Vinyl Tubing

8. Pin-Lock MFL Dis-connect Set with Swivel Nuts (2) 5/16 Gas, 1/4 Liquid $10.99
https://www.amazon.com/Pin-Lock-Dis-c...

This build is pretty straight forward and will last forever. Thanks for watching again and Cheers!