Скачать или смотреть Radiolink T8S & T8FB 8 Channels RC Transmitter Compatible Receivers and Binding Method

Binding step:
1.Long press for one second to turn on the T8S
2.Power the receiver, the signal light of the receiver will show blinking status
3.Use a small needle or pen to press the binding button of the receiver for one second
4.When the indicator light is always on, it means the binding is successful, if not, just repeat step 3.

Note: When these receivers solid light( R8EF/ R8F/ R8FM/ R8FM/ R7FG/ R6FG/ R6F/ R4FGM/ R4F Receiver), it means the binding is successful or already bound.

How to verify whether the binding is successful:
1.Connect the servo into channel 1 of the receiver
2.Toggle channel 1 of the T8S remote controller
3.The servo can be used normally, the binding is successfully
purchase link: https://www.radiolink.com/t8s_where_t...
#rchobby#rctransmitter#rccontroller#fpv#drone