Скачать или смотреть How to replace the Rear Axle Peugeot 206 🚗

BUY THE AUTO PARTS you need for the operation : 👉 http://bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 http://bit.ly/MCD12AppStore, 🤖 : http://bit.ly/MCD12PlayStore 📱
⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎

🛠📏⚙ FIND ALL THE PARTS AND TOOLS NEEDED AND RECOMMENDED BY USETOOL EN ⚙📏🛠

Needed parts:
Rear axle

Penetrating oil : https://maclede12.co/Penetratingoilen

Hose clamps

Rear axle crossbars (SW version)

Threadlocker

💪 TIGHTENING TORQUES FOR CHANGE THE REAR AXLE PEUGEOT 206
Stems on the rear axle: impossible to find. If you have one, please let us know in the comments.
Caliper mount bolts on rear axle: 30Nm
Rear axle to body mounting bolt: 110Nm
Crossbar on stem: 105Nm
Crossbar on fork: 105Nm
Shock absorber top fastening bolt : 70 Nm
Shock absorber bottom fastening bolt : 150 Nm
Plate retaining bolt: 35 Nm
Hub nut : 200 Nm

Discover a vast array of services that will help you run the maintenance of your car: vehicle user manuals, maintenance planning and mechanics-oriented tutorials!
Rear axle on a Peugeot 206.

Discover the world of UseTool EN on http://bit.ly/2mtjtft

Needed tools
-💣🤖🏆The complete toolbox recommended by Usetool EN to repair your 206 : https://maclede12.co/toolboxCLASOS3050en 🏆🤖💣
Hammer
Chisel
Breaker bar
32mm Socket
Socket wrench
Extender
Torx 45 socket
10mm Socket
Flat head screwdriver
13mm Socket
Wire or hook
18mm spanner
18mm Socket
21mm spanner
21mm Socket
Pin punch
Wire brush
Wire cutters
16mm Socket
19mm spanner
Pipe wrench
Sanding paper
Torque wrench : https://maclede12.co/torquewrenchCLAS..., https://maclede12.co/torquewrenchCLAS..., https://maclede12.co/torquewrenchCLAS...
Tape measure

🔝💪Safely lift your 206 with the hydraulic jack: https://maclede12.co/jackCLASOH5304en and axle stands: https://maclede12.co/standsCLASOM3030en recommended by UseTool EN 💪🔝

Hydraulic jack
Axle stand

🚗📢💡 RESOURCES 💡📢🚗

Usetool's warnings
To avoid damaging the silent blocks, you need to finish tightening the retaining screws with the rear axle in the “vehicle on the ground” position.

Before you finish tightening, use a tape measure to make sure the clevis joint is perfectly centred on the axle.

Usetool's infos
To lower the exhaust muffler, the left rear axle cross bar needs to be moved aside by unscrewing the bracket.

📽❤️🚨 USEFUL VIDEOS 🚨❤️📽
[ USETOOL'S TIPS & TRICKS ] Lifting your vehicle safely :    • How to (PROPERLY) lift your vehicle safely...  

[ USETOOL'S TIPS & TRICKS ] How to (PROPERLY) use a torque wrench? 🔧 :    • How to (PROPERLY) use a torque wrench? 🔧  

Space Race by tubebackr |   / tubebackr  
Music promoted by https://www.free-stock-music.com

Terms and conditions of the offer : https://www.mister-auto.co.uk/operati...

Disclaimer: This video was created for information purposes and does not guarantee the outcome of actions undertaken.
To ensure that you see the best results, we recommend getting in contact with qualified technicians who will carry out the installation.
This video provides tips and recommendations that can be useful when repairing or changing parts. MCD12 and its partners cannot be held responsible for any physical and material damage that comes from the poor installation or incorrect interpretation of the video content.
This video was created for information purposes and does not guarantee any outcomes. The user is solely responsible for the incorrect use of repair machines, tools and parts, in particular if these may cause physical damage. MCD12 and its partners recommend taking great care and carefully following the safety rules when carrying out the repair or replacement of any parts. Please keep in mind that using poor quality parts compromises the safety of the driver when on the road.

0:00 Intro
0:23 Lift the vehicle
1:06 Remove the axle
6:13 Retrieve the components
6:34 Components specific to the SW version
9:14 Replace the components specific to the SW version
10:40 Replace the rear axle