Скачать или смотреть 355 SBC Solid Roller with Brodix Track 1's in Camaro Z/28 NETO/N Drag Car

Start-up after replacing flat tappet cam with solid roller.
Pump gas combo:
•010 4-bolt block, 4.030 bore
•Callies Stealth crank, 3.48 stroke
•Eagle 6.0" H-beam rods
•Venolia flat-top pistons
•Brodix Track 1 heads 215cc, 64cc
•10.42:1 compression
•Comp Cams grind #300BR-6, 264/270 @ .050, .630/,630, 106 lsa
•PBM roller rockers
•Weiand #7531 Team G intake
•QuickFuel Q-750-AN
•MSD ignition
•1 7/8" x 29" primary headers with 3 1/2" x10" collectors

The solid roller is a Comp Cams 300BR-6, 264/270 @ .050, .630/.630, 106
The solid flat tappet was an Isky Z-35, 254/254 @ .050, .525/.525, 108

Drivetrain:
•8" Converter, 5200-5500 Stall
•TH400, 2.48/1.48, Reverse Manual w/TCI Transbrake
•Denny's "Nitrous Ready" Chromoly Driveshaft
•Mark Williams 9-inch, 5.29, 35/35, with Mark Williams Hi-Torque Axles.
•Chassisworks Eliminator II Pro 4-link with Fab-9 Housing
•Koni SPA1 front Shocks and rear Coil-overs
•Mickey Thompson ET Street Bias 32x17.5-15